Kaz steering rack. We chose the KAZ steering rack for its suitable steering rack ratio and total rack travel, good mounting points, lightweight design, and potential for use in future cars. Weight 310 g Rotational clearance circle 44 mm diameter Maximum possible angle misalignment 32 degrees Recommended oper If you’re designing your own FSAE steering rack or considering different options, splined shafts are the gold standard. Steering Rack U-Joint 5/8”-36 Spline (Steering Rack) x 3/4"-20 Spline (Splined Insert) (325g) U-Joint can be removed from Steering System The mechanical specifications for the U-Joint are as follows. can anyone give information regarding how positive locking is ensured in it as we intent to use the rack again High quality steering racks from Kaz Technologies are now available. Shop Kaz technologies for all of your FSAE tools and parts, including steering racks, brake rotors, as well as shocks + springs for your Formula SAE racing car. Steering Position Sensor for Kaz Steering Rack Specifications:Rotary potentiometer with total electrical angle of 345°Nominal resistance of 5kΩWeight: 30gIP65 ratingMax permissible applied voltage of 42V Mounts to the Kaz rack with 2 8-32 screws and keys directly into the pinion gear. We have been using a bolt with a nylon insert during set up and testing, however that is not allowed under the rules for competition. After the rack decision, the next most important piece to the design is the Ackerman angles, rack travel ratio, and steering linkage geometry. 3. The steering rack costs $850 and has optional add-ons such as steering angle sensor, u-joint, and clevises. lbth8p jdzq w001w 8sac r4bfyt5g hwpjjvzfw 92uywvl ufp sqg4b pe28